AdamAllen Posted January 1, 2008 Report Share Posted January 1, 2008 Somebody has seen the light. Finally.No need for uber wideness. 42mm would be good.Mabey anodized the sidewalls aswell.But there perfect anyway.I'd Have them as soon as. Quote Link to comment Share on other sites More sharing options...
Danny Kearns Posted January 1, 2008 Report Share Posted January 1, 2008 Cnc'd. But also make them 47mm wide .Perfect. Or make them in both widths for different people Also, 32 and 36 hole for Profile users Danny. Quote Link to comment Share on other sites More sharing options...
Dan@Trials-uk Posted January 1, 2008 Report Share Posted January 1, 2008 Thanks for all the reply's, I have read everyone, and come to the conclusion. This research have really helped me decide which option the customers are demanding, and I can clearly say which style the KO rims are going to come in;) Quote Link to comment Share on other sites More sharing options...
Ryan. Posted January 1, 2008 Report Share Posted January 1, 2008 woooo calm down man...as i read the topic it seemed like you were just trying to get people to choose your opinion when your asking for others? i mean if more poeple will buy the 48 thats the bussiness way to think about it.....isn't it?meh im not bothered i've wanted these rims since i started trials!!! deffo cnc'd squares!!! Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 (edited) Cnc'd. But also make them 47mm wide .Perfect. Or make them in both widths for different people Also, 32 and 36 hole for Profile users Danny.have to remember, their his own rims... its going to be a lot or trouble to make all these different versionsi reckon 38mm front rim (if its double walled) will be loverly on the back...and 48mm for the wide rim loverswoooo calm down man...as i read the topic it seemed like you were just trying to get people to choose your opinion when your asking for others? i mean if more poeple will buy the 48 thats the bussiness way to think about it.....isn't it?meh im not bothered i've wanted these rims since i started trials!!! deffo cnc'd squares!!!i never asked about width....only the cnc/drilling Edited January 1, 2008 by Grant Hundley Quote Link to comment Share on other sites More sharing options...
Danny Kearns Posted January 1, 2008 Report Share Posted January 1, 2008 have to remember, their his own rims... its going to be a lot or trouble to make all these different versionsi reckon 38mm front rim (if its double walled) will be loverly on the back...and 48mm for the wide rim loversi never asked about width....only the cnc/drillingDeal. But 32 and 36 HoleMake them identical looking to the old un's Danny. Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 (edited) Deal. But 32 and 36 Holetell dan that.. im not making them he'll probably say the same, its a lot of trouble Edited January 1, 2008 by Grant Hundley Quote Link to comment Share on other sites More sharing options...
Danny Kearns Posted January 1, 2008 Report Share Posted January 1, 2008 tell dan that.. im not making them he'll probably say the same, its a lot of troublehe'll get the business though. Profile users will eb pissed if eh doesn;t do them in 36 hole an all.The amoutn of people that wanted to run a profile on these rims was un-real.Danny.P.s - Dont piss about with the weight Dan. Just make them strong. Quote Link to comment Share on other sites More sharing options...
Mr Plod Posted January 1, 2008 Report Share Posted January 1, 2008 Make them in all funky colours as well like Deng has Would look the nuts Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 (edited) he'll get the business though. Profile users will eb pissed if eh doesn;t do them in 36 hole an all.The amoutn of people that wanted to run a profile on these rims was un-real.Danny.P.s - Dont piss about with the weight Dan. Just make them strong.im running a 32h rim on 36h hub new poll, make them out of magnesium or not?so you could have the rims weighing 700 grams (for stock...) and be stupidly strongMake them in all funky colours as well like Deng has Would look the nuts ewwww Edited January 1, 2008 by Grant Hundley Quote Link to comment Share on other sites More sharing options...
Danny Kearns Posted January 1, 2008 Report Share Posted January 1, 2008 im running a 32h rim on 36h hub new poll, make them out of magnesium or not?so you could have the rims weighing 700 grams (for stock...) and be stupidly strongNope. These weight freaks piss me right off. Get some mucle's and stop been a faggot.Danny. Quote Link to comment Share on other sites More sharing options...
steve@banbury-trials Posted January 1, 2008 Report Share Posted January 1, 2008 im going with the crowd a bit ,cnc'ed with anodized black sideways,38/40mm and 47mm,32h and 36h . oww yeah ,in mod and stock sizes too steve Quote Link to comment Share on other sites More sharing options...
AdamAllen Posted January 1, 2008 Report Share Posted January 1, 2008 Same width as the old ones? Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 Nope. These weight freaks piss me right off. Get some mucle's and stop been a faggot.Danny.i dont think you understood, magnesium weighs loads less than alluminium.. so make the rims out of magnesium but to the same weight as current rims = stupidly strong rims. Quote Link to comment Share on other sites More sharing options...
Danny Kearns Posted January 1, 2008 Report Share Posted January 1, 2008 Same width as the old ones?Too thin, you need your tpa all the way in too be able have your brake feeling decent on thin rims when you have a frame like a python etc.Danny.i dont think you understood, magnesium weighs loads less than alluminium.. so make the rims out of magnesium but to the same weight as current rims = stupidly strong rims.Magnesium is nowhere near as strong as the material used on the echo 07 rims though.Danny. Quote Link to comment Share on other sites More sharing options...
Shaun H Posted January 1, 2008 Report Share Posted January 1, 2008 (edited) Nope. These weight freaks piss me right off. Get some mucle's and stop been a faggot.Danny.You're the one being a faggot.Get some brain cells and think about it. EDIT: Not sure if I'm remembering right but don't think the Echo rims were actually CNCd. Bit rough.Either way still did the job. Will talk to you about it later Dan, engineer's point of view. Edited January 1, 2008 by Shaun H Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 Magnesium is nowhere near as strong as the material used on the echo 07 rims though.Danny. it weighs loads less.. which means you can have even more material...a thick piece of magnesium will be stronger than a thin piece of alluminium.. Quote Link to comment Share on other sites More sharing options...
Dave Anscombe Posted January 1, 2008 Report Share Posted January 1, 2008 yeah cnc dan........most mod riders im shure would like a good wide rim for the rear 47mm...and a 36 and 32 hole option is verry good ..Fair play dan for stepping up to this Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 (edited) Fair play grant for making dan step up to this thats better whys it say total votes are 46 but theres 9 for drilled and 39 for cnc'd Edited January 1, 2008 by Grant Hundley Quote Link to comment Share on other sites More sharing options...
jsy trials matt Posted January 1, 2008 Report Share Posted January 1, 2008 CNC'd are rather sexy very true!!!!!!!!If they areCNC'd will they be stronger? Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted January 1, 2008 Report Share Posted January 1, 2008 Too thin, you need your tpa all the way in too be able have your brake feeling decent on thin rims when you have a frame like a python etc.well dx32's are that width and they are fine...Magnesium is nowhere near as strong as the material used on the echo 07 rims though.thats irrelevent, kobikes is not echo bikes. i would prefer lighter rims which are still really strong then a heavy rim of the same strength.look at the DOB rims, they are awesome Quote Link to comment Share on other sites More sharing options...
Fishy Posted January 1, 2008 Report Share Posted January 1, 2008 Nope. These weight freaks piss me right off. Get some mucle's and stop been a faggot.Danny.Lmao. Quote Link to comment Share on other sites More sharing options...
Grant Hundley Posted January 1, 2008 Author Report Share Posted January 1, 2008 (edited) very true!!!!!!!!If they areCNC'd will they be stronger?kind of.. instead of having holes they will have thinner metal where the square isso the rim should be stiffer Edited January 1, 2008 by Grant Hundley Quote Link to comment Share on other sites More sharing options...
JonMack Posted January 1, 2008 Report Share Posted January 1, 2008 personally i think 48mm wide is pointless...I ran a 38mm on my XTP and when the pads got to a certain level of wear I couldn't use my brake anymore, so had to buy new pads, so it's not really pointless.thats better whys it say total votes are 46 but theres 9 for drilled and 39 for cnc'd Thats because you set it up so you can choose both options instead of just one, so people did that just to f**k with your poll. Quote Link to comment Share on other sites More sharing options...
Ladd Posted January 1, 2008 Report Share Posted January 1, 2008 CnC'd options of 36 and 32 , 20 and 26 and a width in the middle of 48 and 38mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.