maxxis26

im using the tr on my gu stock by far the best rim i have ever brought! plaz pads on smooth rim - wicked noise!

22 toothcranks are hard to find in trials middleburn do a bash with a 20 tooth chainring if your using non trials cranks try and find a "dmr ring thing" for a bash its a steel bash ring they come in 4 and 5 bolt fitting ebay is the best bet http://www.discountcyclesdirect.co.uk/prod...roducts_id=5502

just found this and had a bit of a giggle

the coke can bodge is for worn square taper cranks check the wiki i think "bigmac" wrote it

it all depends on the ring sizes best thing to do is to lose the 3 "top" rings the biggest ones, that way you will still be able to pick up some speed also what tooth sprocket are you running up front? with trials you will want to keep the chain as short as possable to eliminate "chain slap" with a long chain it can come of the sprockets yes a rear mech with help but keeping the chain short will help alot more

i like my hope mini with a 160mm rotor good grip with a decent bleed and a good rotor im running the 160mm saw rotor did try bigger disks had a 203mm for a while but just didnt get on with it best thing to do is to try different ones try and have a go on a few peoples bikes and see what theres is like...

right time for another ride for the devon/cornwall boys last time we ended going to taunton so maybe ride a bit more of exeter this time? looking to meet at the skatepark at 11am (i know where it is now ) leave a name ... maxxis26

the chain doesnt seem to fit mate cant see it stretching that much think you might have the wrong chain i had a similar problem on a rear sprocket i would see about chainging you chain, it just doesnt look right

there will be 2 screws on your mech to stop it shifting to far up and to far down you cant do anything about the shifter the cable will just go slack after you shift down

Edit Poll paint it or keep it silver

2nd that mine did it with a new chain seemed to hold the chain on the sprocket get a new sprocket, that should solve your problems - dont forget to check the rear sprocket too though

electric cars take at least 3 hours to charge and dont have amazing run time nitros only have to cool down then they are ready to go again as long as you have fuel i have an hpi savage monster truck and a lighting pro 2 both top out at over 40 mph and are soo much fun have a look on ebay for some of the best deals new and used

looks nice like the white looks pimp

im using blue plaz pads on an echo rim and they are awsome i find them to be better than a grind

looks nice not sure on the green stem...

only way to find out is to ride one go to a local ride and try a few bikes see what you like then decide on what to buy

danny holroyd not seen a vid from him for ages

Edited - new pics

try watching some videos watching the techneique makes it easier to understand how some riders get soo much hight your bike setup can also make alot of difference mainly bars and stem

think its a street/trials build on the vee brake issue think the rim will be too wide i ran into a few issues with running a dx32 in a p3 when setting up for a friend best thing to do is to use a front rim as there narrower only other thing to do is run a disk on the rear

nice bike there looks like new on the question of selling it i would start bids at £500

post edited meet at 11 - skatepark

edited

cheers boys its not, just good sunlight covering the damage

go for some red in there red and black always look good this might give you some ideas... http://www.biketrial.cl/Bicicletas/BcicletasWEb.htm