Jump to content

Blake

Members
  • Posts

    5414
  • Joined

  • Last visited

  • Days Won

    37

Everything posted by Blake

  1. Just always found shorter cranks easier to gap with, as the gear ratio feels harder.
  2. Blake

    Jo Prattley

    what the f**kk must be catching up damon on those sidehops
  3. It will just freewheel if you try do it in a vice
  4. Freewheel tool in a vice Put wheel onto freewheel tool so it's sitting in the freewheel Push down Turn wheel anti-clockwise (with tyre still on and inflated) WA-LA
  5. It comes with a crusty old wank sock found under mark's bed
  6. Open up the little seal and put some fresh grease in.
  7. Blake

    How much?

    if you're going to focus on street riding get a stronger frame than a zoot, as it may let you down after some time. It is still very possible to do more trialsy riding on a decent street set up if you have a slightly lighter gearing and decent brakes.
  8. are they cartridge or cage?
  9. I don't have that sort of time :/
  10. Very good riding and very big moves especially considering your age However, I would say that I think you should practice your stability and control, your moves are very big and look good when you do them but when you set up and get on rear wheel it appears you struggle to keep your balance and have control. Just what I think though, keep it up
  11. Great riding but you must be running out of things to do at barrow now make a street edit!! Also who's that at the start?
  12. Also depends what type of riding you wanna do shorter would be better for street riding as more power = bigger gaps but longer for more torque when on rocks
  13. Get some rear yellows and maybe a cable disk on the front to keep costs down high rise bars and a shorter stem
  14. I used to run 170's on a my mod, but now run 165's and can say I much prefer it, best crank length. However when riding my friends 160 cranks I can't help but feel they're a bit too short, but I am around 6'3 so you may prefer them
  15. If the bearings are in a race I'd strip it down entirely and rebuild it with no grease. However if the bearings are loose, I'd just soak it in a degreaser x
  16. Cheers everyone, added a vimeo link
×
×
  • Create New...