dezmtber

Some better pics here

oh my god that's amazing full refund + new hub there. He needs to speak to the shop manager about that

droping 15ft drops to flat over and over again on a hardtail.

some saint cranks i dealt with in 2009 http://gp1.pinkbike.org/p4pb2469474/p4pb2469474.jpg http://gp1.pinkbike.org/p4pb2469471/p4pb2469471.jpg http://gp1.pinkbike.org/p4pb2469469/p4pb2469469.jpg

Its snowing in congleton now

Carb cleaner the paint then leave for 5 mins then use the nitro moors.

Carbureta cleaner strips paint quite well.

No ?

Here for a full bash and snail cams got the rockman. And same again for the jaf with the bash

Setup the brake with the tpa wound out all the way. Try to have the caliper pistons all the way in. Sometimes that can help. You probbably allready do this but just incase.

1/4 is a bit too much imo try taking a 5 mm spacer out

18 x 14 is a winner feels ace now. I will try angel get some better pics sunday for u

Same happend to me months ago on a,much smaller scale. Too vertical tire skids oh crap. Much pain

My 14t comes tomorrow

Edited now playable on your mobile

Honestly I wish I had now. It's cool to have the two gear options I can use 18x 14 for street stuff and 18 x 15 for comp style stuff and can change it at any time. But I now remember how much of a ball ache tensioners are there just sooo gay. And annoying. If jaf is reading out of intrest could the dropouts be changed if i can't put up with them?

I didnt like the tensile tensioner much it was a faf changing between cogs. So I fitted a zee mech with some changes to it works ace and has a shimano clutch helps keep the tension

My mate rides a echo 2013 24 and a onza zoot he said it feels more like his zoot than the echo. But having riden my rockman he said its closest to riding the 20" rockman. I know confusing

Any one who has had the 2012 xt wheelset will know the rear hub bearings fail just before the axle snaps of if your lucky the freehub strips the treads holding it onto the hub shell. No not a fan of shimano hubs here horah to the day shimano use sealed press fit bearings. They should do a mavic type hub I would get one for the xc rig. Shimano use cup and cone as it reduces rolling resistants

That bleed pipe is proper good value I wish they were avalable when I used to have maggies. You can get syringes from the vets just take the bleed hose in with you.

Put a solid axle in the shimano and nut it on. Hope do a superstar conversion for the pro 2 It's a 10mm through adaptors http://www.hopetech.com/page.aspx?itemID=SPG161 hope tech support page will help you both out with the info you need for any adaptors ect.. for your hope hubs Open the exploded view of your hub on.that it will also show all the options avalable for your hub and bearings too

I will get some quality pics in the day

New cranks and bar n stem

The frame set me back £340 its cheap really. The paint and metal bending looks a bit medevil but it does the job and looks fine so long as your not an engineer you won't find fault in it. The geo is right everthing fits no problem. I would expect to pay much more around £500-£600 to get the same quality finish i expect. But for £340 I am more than impressed with what i got. I have fitted some echo tr cranks and trial tech 18t cog n bash. And some higher bars with the try all 2013 stem and now it rides better than my rockman

very cant wait to ride it at a comp