Jump to content

Project Car - I'm Tempted


Tom Booth

Recommended Posts

luckily with the more classic cars, RWD is a lot more commonplace. the insurance isnt really an issue, on classic cars, size means very little price wise

as for simplicity, theres not a lot in it size wise, its more about technology, stuff with twin cams, will be more complex than single cam stuff. but at the end of the day, if your going as far as into full engine rebuilds, then i dont see there will be an issue with any of it, as if your competent enough to strip down an old 8v engine, your competent enough to strip down a 3.0 24v v6 engine, theres just more nuts and bolts really.

Link to comment
Share on other sites

ok a bit smaller, under 1.6.... from around the 80's :ermm:

got it

robin1.jpg

i know what you mean, you start looking and there are so many to choose from, thats why i have had more cars than i have ever needed :P

Edited by Radfax
Link to comment
Share on other sites

ah ha i see, so a complete overhaul then :P i would STRONGLY suggest a MK1 golf or caddy. the parts are very avalible which unlike the spitfire they will be a bit alkward to get hold of i ould have thought, there are a lot for sale and can be picked up for next to nowt! and they can look fapping awsome!

VWGolfMiamiBlue4.jpg

k1ertransportmania20070ft5.jpg

Hofstadevw029.jpg

DSC_0048.jpg

pict008728du.jpg

35cb113ac15c6d20.jpg

more?

Link to comment
Share on other sites

to be fair, the parts supply for triumph, ford, austin, mg, etc are all fairly good, granted you cant just go to your local scrappy for bits, but theres companys out there, who do affordable pattern parts for all the common stuff.

ever thought of bumming off the classic car idea, and doing a kit car. plenty of unfinished cars out there, that are right bargains, rather fun to do, a lot of fun to drive, plentiful parts supply, as most of them will use a sierra for a donor vehicle, and anything that you cant get to fit, you can usually make to fit.

something like a dutton malos, seen a couple for sale as unfinished projects for £400ish, even saw a bare shell, and all the bits, complete with q plate and v5(so no need to sva test it all again, just build it/rebuild it, and get it mot'd)

Link to comment
Share on other sites

E30 BMW 3 series? They've reached a low in price, but cheap parts, lots of spares in breakers yards, and lots of specialists if needs be.

Plus rear wheel drive, and lots of engine choices.

They're starting to be bought up by track drivers to be converted into track cars so it'll be increasingly difficult to find a good one. Prices will soon start going up!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...