Dman

Be sure to keep the rules in mind when riding.

Video on both bikes, please.

Spaced on axle>bb stronger or nah?

Moth & Goth

G comment Looks nice always wanted to try a 26, have to be rear disc though.

Sleep well, buy tripod, film yourself.

@CC12345678910 I will eat my words slightly, as my race face bb just shit it's threads, probably more user error than faulty because I rode with it loose a few times, I didn't realise when purchasing, it needed a different bb tool than what I had, so I just used mole grips, trying not to damage it, but I think it ovalised the cups a bit as well. Been creaking for last few rides, then I noticed drive side cup was pulling out at an angle. Anyway I have the cinch 30mm crank, so I got a Rotor bsa30 steel bb, because it was £40 but included the spanner, race face spanner is £20. Luckily frame threads were fine. I also managed to smash up my race face pre-load collar, which is a composite screw ring to take up any slack on crank spindle. I didn't like this part of the crank from the start. The collar is £15. Instead of buying the collar I got a mate to cut me some bb spacers of different widths. So I now have 2 of the standard thickness plastic spacers on drive side and equivalent of probably just under 2.5 spacers on non drive side. This eliminates any side to side movement just like the collar did and all feels good, no creaks. Am I pushing it with 2.5 spacers? The bb cup threads seemed quite long, roughly half the thread in the frame. Previously on one spacer non drive side with collar wound out. Would a spacer on the axle be better? Ti chairing bolts. Thanks

Next edit will feature all the titanium.

My money was on it being @ItsMatt @Paperclip Said mark or someone from tartybikes. Somebody said they thought it was @jamesb I think it's definitely someone from UK.

If that's an admittance it's you @ItsMatt I was right in who I thought it might be, someone else said to me they thought it was @Mark W

Nice

You were inspired by Danny on a street bike, so I think you should try a 24" street bike, search for an onza zoot or a second hand inspired or Marino. I started on a zoot and loved it. www.gumtree.com/p/bicycles/24-onza-zoot-trail-bike-/1175030122 If you buy something like that you can probably sell for same money when you upgrade or pack it in because you don't like it.

Needs front as well.

They are excellent I dropped a hub in and they fixed it for the next day.

To be honest I don't like running stuff everyone has but they were the best available so had to go with them. Haha. Where are you from? They are all in the North West. First spot with grey walls is in Bury town centre. Dropped pin https://goo.gl/maps/ax4t3bw7jt52 Second spot with cube is The National cycling centre in Manchester. Dropped pin https://goo.gl/maps/mqqws3mj4Wp Manual between benches Dropped pin https://goo.gl/maps/MupR4rwVpgn 1.50 - 2.35 Preston Docks. Dropped pin https://goo.gl/maps/aJ7ufRT3oMH2 Last spots are in burnley, First is on Sandygate Dropped pin https://goo.gl/maps/4Cozdb6xZw42 Second in Thompson park Dropped pin https://goo.gl/maps/BvKUZ79qYx72

Ha

Thanks for all the comments, I'm going to start on another edit soon, hopefully address some of the issues pointed out and go a bit bigger, I haven't filmed most of the bigger lines I have planned yet.

Pat smage beast on bikes.

Very nice Carl, I'd like to see hook, 180 but stay on top of wall, tyre tap back in. #challenge

Yes cocky and Ali c are my main inspirations in smoothness and style.

I've been trying something similar lower and longer though, really hard.