King C

He is hard to get hold of but the goods will come. I bought the echo team forks from him and an rb lever all for £70 and they did arrive even if it was a couple of weeks.

It should fit just fine but if not maybe machine the bash down so that it is thinner and therefore more clearance. only a suggestion.

we might not even get on the same train cos there is no direct herne bay-folkstone train

do the axel bolts up tighter?

so where is this ACTIV place?

jason and simon will be out too (green leeson and planet x)

There all 10mm or qr axels nowadays

The spacing for front hubs are the same but for the rear the spacing for 26" is bigger that 20". I think you can run 26" disc forks with a 20" disc wheel.

BTW where on earth is activ. Why not the train station seeing as thats how nmost of us are getting there.

Our herne bay posse may turn up.

could you do me the chinese tartybikes and selectbikes stickers but have the text white instead of black.

This beast

It looks so clean and new. It makes me

What happen to that bit in Herne bay market car park. Now that was impressive.

Now thats nice.

LOL that fat kid

I think the 2004 pythons did.

From a request made by a new member I've decided to share my method of making magura crossovers. My weapns of choice: Pliers, lighter, an old magura slave cylinder, hose clamps and vice. Step one: Cut the hosing dow to about 23cm. Step two: Put one end of the hosing in the hose clamps and then into the vice. Leave about 1-1.5cm sticking out. Step three: screw the nipple into the old slave cylinder and hold like this: Step four: ignite the lighter with the other hand and wave slowly it across the tip of the exposed hosing for around 2 seconds. Step five: then grasp the cylinder and start to push the nipple onto the hosing Don't I have lovely hands If the hose collapses into a "N" shape it means that the hose is too hot. Et viola: Who likes the Ghetto clear hosing? This way you know if you have air bubbles in the system. BTW I dont really know how to upload pictures and have sort of bodged the uploading. Thats why when you click on the images It says Error.

I think some one mentioned something about some chemical metal once in NMC. Their thread was about bodging rounded square tapers and someone mentioned ISIS tapers and this magical metal stuff. EDIT found it here OT: I recon chinese people are going to dominate the trials world.

Ill make a thread about it. EDIT: done

If your trying to reconnect the cross overs or what ever, what I do is put the hosing in the hose clamps and in the vice. Heat the hosing with a lighter for 3 seconds then push the nipple into the hosing but heres the trick. Have the nipple already screwed into a slave. This way you have something to hold onto and push down with. Works a treat.

I would

I think you've got your KMC on the wrong way round but other than that it's pretty sweet and simple.

They look pretty pimp. King chan the china man