Jump to content

2010 Stocktake


Mark W

Recommended Posts

New year, new bike, new pics of all 3!

(EDIT: Weights: BMX 9.8kg [now 9.5kg], 24 9.8kg, Zoo 8.5kg)

lynx1.jpg

lynx2.jpg

lynx3.jpg

Frame and Forks

- Frame: Lynx Long

- Forks: Trialtech

Wheels

- Front hub: Viz Light

- Rear hub: Echo TR Screw On

- Snail cam: TR snail cams

- Front rim: Trialtech SL

- Rear rim: Trialtech SL

- Spokes: Sapim

- Wheelbuilds: Mark

- Rim tape: Tarty Special

- Inner tube (front): Maxxis Ultralight

- Inner tube (rear): Maxxis Welterweight

- Front tyre: Try-All

- Rear tyre: Monty

Brakes

- Front brake: Magura Louise

- Rear brake: Hope Mono Trial

- Rear brake lever: Hope Tech

Drivetrain

- Cranks: Try-All ISIS 175mm

- Freewheel: Echo SL 18t

- Chain: Trialtech Z610 HX

- Rear Sprocket: Echo TR Screw On, 12T

- Pedals: Trialtech MG-1

- Bottom bracket: FSA Ti 68x113

- Bashring: Trialtech Ti

Steering

- Headset: Cane Creek

- Stem: Try-All Pole

- Grips: Atomz

- Handlebars: Try-All Carbon

urban1.jpg

urban2.jpg

urban3.jpg

Frame and Forks

- Frame: Echo Urban

- Forks: Atomz

Wheels

- Front rim: Echo TR

- Front hub: TR

- Rear hub: Echo TR Screw On

- Rear rim: TR

- Wheelbuilds: Ali

- Rim tape: Echo

- Inner tube (front): Kenda

- Inner tube (rear): Kenda

- Front tyre: Maxxis Holy Roller 24x2.4

- Rear tyre: Maxxis Holy Roller 24x2.4

Brakes

- Rear brake: HS33 (when it's on, which it hasn't been much)

Drivetrain

- Cranks: Trialtech ISIS 175mm

- Freewheel: Tensile 96 18t

- Chain: Trialtech Z610 HX

- Rear Sprocket: Echo TR Screw On, 13T

- Pedals: Trialtech MG-1

- Bottom bracket: FSA Ti 68x128

- Bashring: I don't make mistakes

Steering

- Headset: Echo SL

- Stem: Onza PZ31 85x20

- Grips: Rockman

- Handlebars: Trialtech High Rise

Seating

- Seat: Federal

- Post: Premium

- Clamp: Inspired

a2b1.jpg

a2b2.jpg

a2b3.jpg

Frame and Forks

- Frame: WeThePeople AtoB

- Forks: WeThePeople Helium

Wheels

- Front hub: WTP Supreme

- Rear hub: KHE Geisha Light

- Front rim: Odyssey 7KA

- Rear rim: Alienation

- Spokes: Sapim

- Wheelbuilds: Mark

- Rim tape: Kink

- Inner tube (front): Maxxis Welterweight

- Inner tube (rear): Maxxis Welterweight

- Front tyre: Ody Aitken 2.25

- Rear tyre: Ody Path 2.1

Drivetrain

- Cranks: Profile 175mm

- Sprocket: Tree 25t

- Chain: Z510 HX

- Pedals: Fly

- Bottom bracket: Profile Mid, ti

Steering

- Headset: FSA Impact

- Stem: Profile

- Grips: Yoshida

- Handlebars: WeThePeople Mad Max

Seating

- Seat: Eclat Gonzo

- Post: Eclat

- Clamp: Fly

EDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDITEDIT

EDITEDITEDITEDITEDITEDITEDITEDITEDITEDIT

New frame, Fit Hawk V2 - shortened the rear end with the use of an Ali and a grinder (then a file...).

hawk1.jpg

hawk2.jpg

hawk3a.jpg

hawk4.jpg

hawk5.jpg

hawk6.jpg

Link to comment
Share on other sites

Bikes look sweet. And i'm lovin the inspired sticker on the echo.

Do the trialtech high risers feel the same as normal trialtech bars but taller? as they have the same up and back sweep. If so I might have to invest!

They sorta feel the same, but it's hard to describe 'cos they're pretty rolled back on my 24 so they feel more 'streety' rather than more trialsy like Trialtech Sports do when they're rolled forward in a normal trials way. They do feel reasonably similar though, it's basically just the bit between each bend that's changed, rather than from bend to tip.

Link to comment
Share on other sites

Ashamed of those profiles.

All looks nice though. Would have thought you would have a brake on the BMX though.

They were free and they work really well - not really much not to like about them...

is that one of the splined tree sprockets, if so how good are they as they use a interesting fitting system?

It's awesome. Had a 25t, moved up to 28t, now back down to 25t - they've all been fine. Really nice and solid, plus it's meant I snap a lot less chains 'cos my chainline is spot on now whereas normally it'd be a fair way off. Bueno.

Link to comment
Share on other sites

Bikes look sweet. And i'm lovin the inspired sticker on the echo.

Do the trialtech high risers feel the same as normal trialtech bars but taller? as they have the same up and back sweep. If so I might have to invest!

What Echo is this?

I love the BMX the other 2 well their trials related so meh.

Link to comment
Share on other sites

That kinda depends by what you mean by 'riding it around normally' - I'm used to either no seat (mod) or a low seat (BMX), so I just leave it low. I never really tweak the height of any of my seats just because I don't really use them much, other than to feel where my bike is when I'm doing tricks and stuff. I hate sitting down and pedalling so I never really do it, so it's not really an issue.

Street wise though it's really nice. Can do 'trials' on it if you want, but it's also nice for doing 180 bunnyhops up stairs, general spins, manuals, manuals to 180, brakeless nose pivoty things, half cabs, etc. - it's just really nice with that bar and stem setup 'cos it makes it feel shorter and higher which is pretty ideal for BMXy manoeuvres.

Link to comment
Share on other sites

Yeah, if this Echo had horizontal dropouts it'd be peeerfect. If you get a longer Pivotal post (they come up to 330mm length, which in imperial measurements is about 4 miles), you could run a nicer seat that you can raise up without it being too heavy. Other than that, it's ideal really. Kinda fun to just ride from spot to spot too. I'm running 18:13 so it's a bit better for getting speed up and doing rollbacks, and it means it's also a pretty ideal 'riding around town' gear too. Can nip in and out of traffic easily, etc. It's just good!

Link to comment
Share on other sites

They were free and they work really well - not really much not to like about them...

It's awesome. Had a 25t, moved up to 28t, now back down to 25t - they've all been fine. Really nice and solid, plus it's meant I snap a lot less chains 'cos my chainline is spot on now whereas normally it'd be a fair way off. Bueno.

Not developed wobble yet?

Link to comment
Share on other sites

Not developed wobble yet?

I keep them tight and don't take them on and off much.

Any particular reason you use a magura disc on the front and a hope on the back or is it just thats what you had available?

Precisely (Y) That front brake's been with me since the Atomz stock...

Link to comment
Share on other sites

Mark, do me a favour if you don't mind bud, could you measure from the BB center to the top center of the headtube for me?

The WB, is it 1020mm on your bike?

I'm thinking a the wee bit longer chainstay on this frame would suit me down to the ground.

I'm liking the look of this frame more and more, was tempted when I got my skull.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...