tdubz

Did u getthe cranks off ebay?

From your pics your bike doesnt seem that bad Ride parts till they break then replace with better ones get your moneys worth If you dont care about the frame etc it will mean your less fussed about damaging it etc so might push your riding forward

Frame: zhi 26inch Fork: cannondale fatty r Stem: because Bars: tarty Front wheel: d521 drilled on deore hub with grind Rear wheel: drilled rim on hope pro 2 with grind Tyres: echo Cranks: echo Pedals: welgo Front brake: avid front brake with avid lever Rear brake: magura hs33 water bled with heatsink pads Headset: fsa pig sealed Bb: trialtech Chain: halflink Tensioner: home made!!!!!!!! Future plans New front Pads Different ring setup to gain better chain adjustment to eliminate bodged tensioner New front and rear tyres but want light ones All comments welcome

Tnn clamps you will never go back

I am riding zhi and barry is riding a echo pure

Lance trapps section on contact is good and that canondale he had was amazing!!!

I was a menber on trials forum remember all the old classic sites Trialskings Bashguard Nailsea Pilesoftrials (lewis greenhalghs old site)

Sorri it was a wide angle Was using the tripod andeeee hence no camera shake

Me n baz both riding new feames took them out for a spin saturday Also got one of those magnetic macro lenses for my playsport... Not overly chuffed with the outcome from the lens as you will probably agree although it was a bit of gkare due to sunshine

Not having a go andy just saying found the tripod helped me out a lot

get a tripod andy you dont necessarily need to have the camera positioned on the floor using one it just massivly eliminates camera shake even when holding the camera in your hand

Ended up doing this

What front tyre is that?

Got my first horizontal dropout frame before i describe my issue here is my current setup: hope pro 2 hub kmc chain zhi frame the issue i have got is that i cannot get snail cams to fit on the inside of the frame, and there doesnt appear to have any holes on the outside to run them with my wheel slammed to the front of the dropouts i am between links to acheive what looks to be suitable chain tension in my opinion i have three options 1. buy a shadow half link chain, but are these chains strong enough for trials, one of my biggest fears is chain snap on a drop scenario 2. buy a half link and fit it into my current chain, but i have heard these are not mega strong either 3. new hub, really dont want to do this due to cost and also like my hope hub 4. run chain tugs if anybody can recommend either the suggestions above or any other ways to do this i would be most helpful.

Sorted got engineer to tap them to normal thread of lugs now All is well

Kodak playsport

Anybody any help on this issue

I am having issues finding some v brake lugs to fit my cannondale fatty forks the ones i have tried the threads seem too big, they wind in a couple of turns then stop i have measured the thread of the lug and it measures 6mm all the ones currently on ebay are either m10 or m8 which ones would i need another idea i am having is to just get an engineer at work to tap the fork to the thread of the post but this is a last resort any help on this would be great thanks thomas

I didnt dismiss it Just said i preferred his brake riding

I know your shreddin brakeless but i would really like to see you with brakes back on That last leeds ride i ride with you, your riding and power was amazing Brakes back soon please

What forks is guy on silver 26incher runnin?

Cant seem to find any lgv refills On tarty

These are the tnn pads i previously had I want tnn lg pads but which refills do i order to fit them???