Felix_HBtrials

You will get the same '' issue '' with those RL mounts on a Crewkerz Jealousy frame. However, the fit on the Jealousy is perfect, the cylinder touches the frame, but still sit straight. Using other clamps the cylinders have a gap with the frame.

I think all brakes should be post mount and frames IS That was threads are only in the brackets, no way you can ruin the frame or brake And also it's easier to go from 160-203mm

What I think is weird about the Monty is Gilles... He said he was running them for 2016, Monty even took his statement about the tires for promotion, and last comp he won on the Stiky Light, he keeps switching tires. Anyway, it's Gilles, surprised he is still riding a Clean at the moment. Thanks for the review! You are running pretty high pressure! I am 90kg and running 1,5 bar on the Kaiser without issue.

Epic riding, pretty explosive edit!

Hello, Sure, the Van scene is the best in Canada. The level is high and weather is good, many spots. There are couple group for the Vancouver group on Facebook: Vancouver BC Bike Trials University of Biketrials CPTA Bike Trials Club

Leave it black! Damn it's nice

So good! Well done

Hope is super good, MT7 has shown phenomenal power Saint 810 are amazing

Or a Bionic

Pavel is never disappointing!

My brother did so... the support plate is heat threated and just snapped on both bends, he had to weld it back together haha! I would suggest to grind the part tha hits the spokes, that's what I did and was good! Turning the tensioner around won't change anything as it's hitting the spokes, needs to get further from the center of the wheel to get more clearance, not turn around it. Those tensioner are perfect with hubs that have large spacers on the side like Echo TR, the hubs with flanges close to the dropouts, such as Rockman hubs cause this issue.

Are you using Shimano SP5 linear housing? That's soo stiff. Liked it a lot on either BB7 or v-brake

Nice bike.... bikes!!! Like all the builds, but my favorite was the very first, that damn Karbon fork looks good on everything!

The Racing Line nano and Clean lever are the ridable form of you idea. Using a 13mm piston instead of the 14mm, you get 16% more power. If you go to 9mm instead of 14... huge power but like Ali said, little pad movment and always rubbing, plus so much power rim, frame ALL will bend. The Racing Line nano already need quite a straight wheel and good set up to have a decent feeling, plus the extra power requires a booster, and you can still feel some flex, can't imagine with 9mm. BTW, thanks a lot Ali for your input, was planning on trying that at one point, you just confirmed me it's a waste of time

Wow! Lucky, that must be a move so hard to land, mentally. I can't even do it on a trampoline, without the bike! Can't wait to see that in his next video.

What about Ali? That's quite high to fall from ?!

I have a friend who was doing drops to flat, landing pretty harshly all the time. Did that one whole summer and he was wondering why he went through his rear rim, cranks and frame.... And he wasn't riding extra light parts. Well I guess Racing Line will give details about those broke cranks. And for the # freewheel, sorry we went away with this thread but I don't know has I haven't tried it.

That must be what you're looking for, btw there is vol 1,2,3... enjoy!

Is it the first broken one internet sees? In the coments on FB, Patricio Escobar:I broke the original bb30 tryall the same way....

Racing Line is the way to go if you're not sure about # FW. Then you can keep your beloved FW!

Solid riding!

We definatly don't live on the good side of the Ocean Carthy does the up to front so much easier than Vincent near the end of the video

Love the idea of M10 bolts to have a bigger axle and bearings. Really nice products. I wish I had a lathe, once I get a house I will buy one and put in the garage, must be the best feeling to ride your own stuff

Sorry to dig this, But anyone knows why the taper headset....is upside down?

So good! Both the riding and the video work!