dezmtber

Good seeing you lot. I am felling a bit whiplashed after that backwards slide early on

Luther was awsome for anthem who missed the series

Hope, brakes hubs stem pedals headset grips Jaf frame and fork Middleburn cranks and cog Skf bb I think UK? Seems stuck for the rest of the bike to be full uk The UK based companys can eaisily fill the gaps but the stuff would be imports

link fixed

I will be there straight from work 6 ish

Who remembers this guy, years ago http://m.youtube.com/watch?v=OzlvpoZFd9o&desktop_uri=%2Fwatch%3Fv%3DOzlvpoZFd9o

If the front mech is a 2 speed mech it will rub on the lower gears if you use a granny ring smaller than a 26t A triple front mech with the screws adjusted to be double will work better on what I think u are running 22x36 If the front mech is a 2 speed mech it will rub on the lower gears if you use a granny ring smaller than a 26t A triple front mech with the screws adjusted to be double will work better on what I think u are running 22x36

Looks like you just need to bring the front mech up higher to clear the bash in the big ring. It will set it too high as far as the proper setup but its the only way. Other than buy a smaller bash

I just had a thought. Has anyone got any vids with von Williams riding. http://m.youtube.com/watch?v=OzlvpoZFd9o&desktop_uri=%2Fwatch%3Fv%3DOzlvpoZFd9o

Good god I remember that video. That was a lot of years back. Good to see it again I do miss some of the 1st new world disorder trials riding

We used to sell lapierre aka snapierre We no longer sell them due to all the zestys snapping. They do get replaced by warrany but I wouldn't buy one. The wheel base on a lapierre is also longer than a 29er

Well if u got the funds I highly recommend those f20 pedals there the best I have seen inn ages

Nukeproof electron of crc will be your best option Cheap light and strong

I used to run a schwalbe mow Joe up front on the mod. Worth looking at there very nice.

my 1st quick video of the ozonys, next month or so I will be working on my get creative edit. now mobile compatable

i find a nice cold bath and some food does the job for me

you know how to lift the front wheel in a wheele. its the same only you put pressure on the pedals with the brakes on and let go of the rear brake to begin a static wheele motion. once you get the front high enough put the rear brake back on. then get to those back wheel hops. once you can do this real easy then try pedal hops. it took me ages to get this, dont worry if it takes even a month to get it.

request sent pal

they can creak a bit in the steerer tube but all good for me so far

My 16 st basher mate and i are both running Kmc 710sl chains 6 months at a time with no breakages. Fitted using a 3 piece connector. As we tryed the split link and snaped those in a month. I fitted a 610hx chain to another mates bike. It looked good and strong and u can use a regular chain splitter on it no need for a bmx tool

That top cap is mega bent. Someone massivly overtightened it. I bent mine a little bit but if you take it off and put the should be flat side on a flat surface and hit the bottom with a soft hammer they usualy straighten up just nice. But that one may just need a new one. Nice bolts though I Do just love ti bolts. My bikes all ti and alloy

i am in for a sub tgs group in stoke. we should ride into town and ride tesco and the musiem (spelling ?)

Definilty after work at 7.30 till 10 With two mates

What time of day are you likely to be riding stoke plaza?

Tensile offset magura mounts will get the brake calipers closer to the wheel rim. Or try adjusting the calipers on the 4 bolt mounts