Alex Dark

Inspired Hex, with a lowered marzocchi air fork?

6082 is the uk equivalent of 6061, far lower strength than 7075 that most trials frames are made from. you'll buy at t6 temper presumably but after welding will be at t0 at the haz ( heat affected zone ). Without heat treating the area around the welds will be significantly weaker due to the rapid cooling of the metal resulting in the crystalline bonds in the metal not aligning correctly. Pretty sure I'm right in saying that.

Wouldn't be too hard to machine a 1.37" x 24tpi thread. Pm me

Would be pretty difficult to tap a thread that large nice and square , as above get hold of a bb she'll or ask a machinist to screw cut one for you

Anyone stripped down a vag brake rear calipers ? Mines seized and binding loads

Definitely don't go down the welding route , I'd send back and get a refund if it were me

If you've got the original , pm me

Just throw me your when when you've got time Treby

Poo 2 looks good! Looking forward to seeing it all Together mate

Tappy

Looks good and rides well

I've got a spare if you want one .... Pm me

Gigapipe and Echo tr ?

110mm would be possible if you ditched the disc mount , if not you'd probably have to part the hub shell in half and rebond it with some carbon tube.

Every so often I see a video i really want to emulate.... just want to build up a brakeless bike now!

It took far more time planning than actual machining ; not sure if daves post is pitched at me or Mr beaden.

Badass to see D-Wats making a return ha.

I did one at 116mm with a properly usable disc mount. i don't think 110mm is possible without shortening the hubshell with a working disc mount?

Really needs to roll his bars back! Makes him have such an awkward style being so short....

It's really not very simple at all! Drive side spacer , non drive side spacer , shell , both sides of the axle, bearing bore of the cassette body , Od thread on cassette body .

Such a sick style! Should come Out on a ride soon

Ride video form Bristol a month or so ago Paul Ruskin on the inpulse James Davies on the rock man alkali Matt pengelly Echo 20 Alex dark echo 24 Andrei burton echo 26 And several more people haha

Danny Mac air king , good grip , high volume and extremely bouncy , but fairly pinchy.... Maxis are near discontinued , 24 is pretty much a dead wheel size in mountain bike apart from kids bikes

Sounds like youve stripped the head of the bleed screw. Try tapping a slightly larger torx bit in, the impact will help loosen the bolt and hopefully the torx will bite and unscrew the bolt.