Krisboats

That'd more than likely be pinncale studio, absolutely shocking software... crashes all the time and the majority of the effects were locked until you bought them seperately.

Printable OHP paper, its quite expensive but worth it if your going to make a lot of stickers. You print onto it with the image reversed so that when you flip it round to view the shiny side the image is the correct way round. Then get some extra strength double sided tape (white tape for a white sticker background and see through for.... yep, you guessed it... see through) and apply this tape to the rougher printable side. Then cut it out and stick it down. Simple.

Ha ha, dude.... how are you? I lost your mobile number when my phone kind of broke (it drowned in blackcurrant) Are you still riding that old school t-rex? I'm getting a new-style t-rex myself soon.

Dude, theres loads of us riders here in leicestershire... we go riding all over the county, you should come with us sometime. Might actually attend this competition myself, anyone know whether theres trains from leicester to derby on a sunday?

f**kin hell, that ones tiny... try having one that lives under the fire thats big enough to not fit on your hand... next time he's out i'll get a picture of him on my hand and i'll whack it up on here. For a comparison, it wont be long before it can cover a saucer plate with its leg span .

I have pariah, though nothing like that has ever happened... you got the latest drivers for your graphics card? If your pc can play pariah you should be able to play counter strike 1.6 okay and maybe some of the source games at low settings as well.

So if you where travelling from devon to the east midlands, at 4 in the morning on a clear motorway on a dry cool night with good visibility you're saying you wouldnt get there any quicker if you went a bit over the speed limit? Theres no innocent lives in danger either. Yeah, say speeding has no point and you dont really deserve a car if you do, but going too slow can cause accidents as well as people will try to get round/past you in situations they wouldn't ordinarily have to. ... My point, you should drive at a correct speed for a given situation, never speed through school zones or public areas (i.e. housing estates or town centres) and never go slowon a motorway or on narrow country roads. You learn, how to make decisions like this when you start driving... you can't say shit until you do either.

When i'm about to get on the bqack whel i let go of both brakes, and use a small pedal stroke motion at the same time as pulling up on the bars, then pull the rear brake on when you get into the pedal hop position. For a point of reference you should try to focus on doing it in a smooth action rather than stamping on the peddles... try doing it slowly, but controlled and you will find it much easier to learn. Then proceed to peddle-hop as normal.

Nice punn, i think all paul needs is some eye shadow and lipstick then he can go get himself a man-friend

Oh my god that first picture is immense, apart from that super unusual cable route you've got going on that bike is perfect. Very nice indeed.

I always have liked that spray job... looks very swish. All-in-all a nice original bike that stands out well

Its shite the bearings are crap, get a truvativ giga pipe team downhill (the one with 4 bearings)... it'll be much better.

They sound absolutely incredible, i went round jons house with boumsong and he has some in a small room downstairs, all i can say is Thats the one i think, didn't have an automatic opening door though, you had to pull it out lol all that technology and expense and they cant even have an opening door Could you not use the auxilary input on your hi-fi and then plug the pc into the aux inputs using the necessary cable, then all you'd need to do is switch the hi-fi to aux mode and your away. It'd still leave you with good speakers that you've already got and the functionality of your hi-fi for things like listening to the radio.

I think park tools make one, theres one in the evanscycles catalogue anyway, they're a decent company with a good reputation, i just don't know how much the bags are.

Hi, nice to meet you... in a relative internet kind of way

How will it become unstuck... i dont get what you mean... you leave it shiny side down facing the holes and go all the way round the rim with it holding the end in place with your thumb. Once you get all the way round and go a couple of inches further the tape sticks to itself and you dont have to hold it any more. It takes about 1-2 minutes per wheel if that and is waterproof... unlike ribbon. And at 9p for an entire roll from wilko's its a bargain too

I didn't think nitromors was that bad when i used it, obviously i wore gloves but if you do it outside and dont sit with your head right over it breathing in real deep breaths then i dont see a reason for you to use a face mask. It is designed for use on wood afterall so its not as bad as caustic soda. The lacquer is available from all all good diy shops and halfords like stated above but if theres not one near you your local car garage should have some in as well. A couple of cans should be sufficient to coat an entire frame so if your only doing the area where the t-mag sticker is then you should be fine with one can.

Is that a mistake, if not whered you get them from?

Thats why you pull it off in a big enough loop to go round the entire rim (shiny side facing the holes) and stick the tape to itself, then proceed to use another layer of tape, only this time you stick the sticky side to the original tapes sticky side. You end up with double thickness tape with two shiny sides. Not exactly rocket science ey

I just re-read the question though and now i see what he's getting at. The ethernet ports on the router are all OUTPUT sockets. The ADSL socket is the line in for the router. If you had one of the NTL modems then it'd be fine but seeing as it isn't you will be easiest just exchanging it for an NTL compatible router.

You should be able to let the router use an outgoing adsl line from you pc in order for it to gain access to the internet however you'll need to use the ICS (internet connection sharing) feature of xp however your pc will need to be on constantly for the router to have a connection and it will be marginally slower as the signals will have to travel through your pc first then the router then other computers connected to it. My grandads on ntl and he's got a little purple external broadband modem that has an adsl output socket on it for connecting to your router, do you not have one of those you can use?

They fell to pieces because you tried using a soft pad to stop your rim which had just been angle grinded into a sharp pointy and uneven surface, whilst you were travelling at a fair old speed.

Neither of them suck in the slightest... you may not be a fan of them or even like them but regardless of your tiny opinion they are both fantastic bands, the chili's (notice how its spelt by the way ) have churned out numerous top selling albums and god knows how many chart topping songs. The new chili's album just goes to show what an amazing band they are with its varied and enthusiastic array of songs. They've been a massive band for soo many years now and they're still coming out with great work... in no way do "they suck". As far as to say all their albums sound the same, you're obviously either retarded or deaf. And to say all of their songs sound the same is very snobbish and big headed of you... have you even listened to every song they've ever done? No i thought not. If you couldn't guess, chili's all the way.

Oh dear lord... you can't ride in trainers, thats the worst thing to ride in ever. A nice flat sole that sits comfortaby across all the pins on your pedal offers much more grip and a nicer feel than any rudeboy shoes. Vans work for me... basically because of the large size i need but also the depth of the sole helps your riding too, but you want a compramise. Not too thick to leave your foot inflexible, and not too thin to give you footache. Skate shoes are definately easier for riding in than trainers, if you still wanna be "rude" though you could go for something like these

In premiere the filter is called a colour pass, it only passes through the colour that you want to let through... everything else is black and white. The real question is what effect does he use to get the dreamy light effect thats similar to high dynamic range in the half life 2/counter strike source engine?