narrowbars

Looks perfect. To all you low long silver riders that are complaining about it ever heard ''it's not the bike it's the rider''? Chris is a much better rider than you will ever be and he's doing in on a bike that doesn't have a 10000000000mm wheel base.

--> QUOTE(joe b @ Jun 26 2006, 08:41 PM) ←Hello again... I am piecing together a new front disc brake. At the moment, i have an XTR cable and half an Avid Ulitmate lever (everthing but the Cam-Split bar clamp part, which holds the lever in place on the handlebar). I tried to get the spare part for the lever through the main importer, Fisher Outdoor Ltd. They said that they only sell through trade. So, Cleanbikes tried to get one for me, but as the minimum order is £300 we couldn't really see the point, just for an £11 spare part. Could anyone point me in the right direction as to where i could either buy one, new or second-hand, or maybe even get someone to make one for me; please bar in mind i don't want to be ripped off. Any help would be much appreciated! Cheers, Joe. Go to a different bike shop that orders from fishers more often. Next time they do an order they should be able to get one

What are the best heatsink brake pads? Blue/green or Red? On a chrome rim

Nice video realy liked the music. I,m building my leeson back up soon Fred I will let you know when it's done and we can go for a ride. Paul

I think it's 22.2mm

www.tastynuts.com

Have you tried betd(goldtech) I think they used to make a one piece bash? If not they maybe able to make you one

I,m running 23-9 If your used to trials gearing then 25-10 or 28-11 would be good for you. Chances are you will need a half link in the chain with the non standard gear ratio's

No longer ride trials

Livin' in exile

Realy nice. Needs a higher front end though

Fit series 3. Weighs under 22lbs

http://fisheroutdoor.co.uk/public/index.ph...id/contact.html Try asking fishers. They are the uk importers of avid. Paul

Hi guys Does any one have either: Dj Ani Glitch Dj Ani Grand prix I have searched for these tracks for ages but I can't find them. Any help would be appreciated Thanks Paul

The bolts are about 25mm long(of thread). There made from steel and have a 4mm allen key head. If your planning to buy a set I have a brand new black pair you can have for £15.00 posted. Paul

Try www.ultimatepursuits.co.uk They are the direct supplier for shimano into the uk. I fit's not on that website then chances are it's not avalible. Paul

http://www.argoscycles.com/

Leeson 609 (White) £400.00 Pashley forks (White,Brake mounts on rear) £79.99 Chris king titanium headset £259.99 Thomson elite stem (Black 100mm 15'') £69.99 Answer pro taper bars (Cut to 24'' wide) £49.99 Avid ultimate lever £65.00 Avid ultimate £89.99 Magura hs33 (2004 lever,Braided hosing) £68.00 Flite slr saddle (White) £74.99 Thomson post (Cut to 1 inch long) £69.99 Middleburn rs8 cranks (Leeson modiffied bash gard) £164.99 F.s.a ultimax ti bb £74.99 kmc kool chain £14.99 Leeson chain tensioner £15.00 Hope mono on sun ryno lite (Black hub, Drilled rim) £86.00 Chris king on araya 7x (Black hub, Chrome rim, Drilled inner wall) £417.00 Maxxis max daddy £9.00 Tioga comp x £13.99 Nokon front cable (Silver) £17.49 Kink omega grips £7.99 Magura braided hose £21.50 Two std tubes £9.00 Rim tapes £2.99 Moneys for spending lol

On 26 I think it's about 12 inches

Was proberbly ok with the pig as there not quite as highly engineered as a king. Any proper bike shop should be able to face you headtube. Should cost you are £15 Get that done and I will be very surprised if it still creaks

Try getting your headtube faced. My king used to creak loads. As soon as it was faced it stopped. Also chris king don't warranty there headsets if the headtube hasen't been faced. Paul

For what ever reason black spokes snap more often than silver ones. As you seem to no everything there is to no about everything then please could you let us all know why this is. Thanks For all your helpful comments.

They have only a 3 month warranty+megamo went bust a while ago so there will be no chance on a warranty. I suggest building the wheel 4x both sides as your quite a big guy. Use silver spokes as black are weaker. They are weaker because they are made slightly thinner so that once they apply the black coating there then the same as normal silver spokes and still fit through the hub flanges. Paul

My fit s2. http://www.trials-forum.co.uk/gallery/1138..._1198_14039.jpg http://www.trials-forum.co.uk/gallery/1138..._1198_13232.jpg Soon to be replaced with a s3 in blue with white odyssey race forks. Alot of this bikes set-up is for sale: frame fork stem seat sprocket Let me know if your interested in any of it. Paul