Alex Dark

I can’t think of any drills , but what works for me and also where I struggle most is switching between taps and up to fronts.

Mines still going strong and I’ve given it a serious kicking.

Another vote for z610hx, I wouldn’t run one of those lightweight drilled ones personally.

Should be fine as its a normal round profile tube as opposed to a funky hydroformed section

Love the XTP

Dead image link....

Can you take a picture of the wheel / hub that’s on it ?

Won’t really make any difference to progression ; as long as they’re not hilariously oversized or spinning on the bar. My personally preference has always been for foam grips

Best 24 tyre IMO is the Continental Air King. I loved mine. As above , wont make any difference to track standing , just keep practicing. Check out Mastering the Art of Trials by Ryan Leech and or Trashzen.com

Errr not something that isn’t made of mild steel and weighs a tonne. Marino springs to mind ( Ross McArthur ? )

This is correct, 135mm x12mm singlespeed disc hub

Yep , I won’t tempt fate but I’ll just say I’m happy with it.

Some bt raven frames

Highlights of the Mazda so far.... Incredibly stoked with how it turned out! Here you can see the horrendous angle of the number plate...to be fixed. Fitted my new KODE steering wheel, need to machine up a short quick release boss because i cant reach the stalks with my normal sized hands. Spent a day polishing with Autosmart Mirror and afine black pad on the rotary, finished with Poorboys black hole and a coat of Fusso sealant. Towstrap and GV lip fitted also! Its official...new Instagram handle for the car On my commute back from work, literally loving this little nugget New wheels purchased should be with me soon.... plenty more to come too! Made a good start on the manifold the other day. New clutch went in along with a 6spd gearbox. Laid out the old ( mk2 ) and new ( mk2.5 ) exhausts. Fair bit to make up between the two, so the downpipe will be extended further underneath the car than planned. Took a stock photo of a kraken downpipe, ordered up some bends and 3" 304 tubing and set at it with the MIG tacking it together. Terrible picture but you can see the rough routing of the exhaust. Extra tubing to be made up with my decat pipe. Lovely Cobra bucket seat finally in, put the original oem runners in with the seatbelt tabs. Seats very grubby again but looks better. Decided to design some new gauge faces , Porsche font with a matt black front and pure white numbers. Needles will be recoloured purple. Also had the excitement of taking the car up to a friend of a friend to get the fibreglass plug made for my lovely RX7 wing.

Enjoyed that mate , we should go down to Redruth again soon I haven’t seen any of those spots before !

White fork I reckon , cool to see a proper old school mod built up

This kid literally asked me if I was Mike Beck yesterday.... naturally i asked him to repeat it for the camera. Tickled me somewhat

Well depends what you mean by street..... theres seatless bike riders that ride here

There’s some riders that do Plymouth , in fact we’re there tomorrow if it’s any use

I’d personally just put a Magura on it. But see below. http://www.trialsmaster.net/categories/79/products/502

No idea , I’d personally wait or get a secondhand echo freewheel.

It seems they've changed the names again; there's no TR anymore just an SL. https://www.tartybikes.co.uk/complete_freewheels/echo_sl_108_screw_on/c16p10864.html?pos=1205&search_params=YTo3OntzOjEyOiJjYXRlZ29yeV9pZHMiO2E6MTp7aTowO3M6MjoiMTYiO31zOjE2OiJjYXRlZ29yeV9yZWN1cnNlIjtiOjE7czo4OiJrZXl3b3JkcyI7czowOiIiO3M6OToiYnJhbmRfaWRzIjtOO3M6NDoibW9kZSI7czozOiJhbGwiO3M6NDoic29ydCI7czo5OiJwcmljZV9hc2MiO3M6MTA6ImNvdW50cnlfaWQiO3M6MToiMSI7fQ%3D%3D You can also get a titanium version too, but they've been known to be weaker.

Acs claw are long gone for trials use (32ep). Common favourite now are the echo SL/ TR freewheels (108ep)

That’s pretty cool, never seen one before !

God I miss buying MBUK and reading hip-hop